AirGuard™ is the easiest way to stop finishing the day with grit in your eyes, dust in your throat and a face you have to scrub clean.

It covers your eyes, nose and mouth in one piece. A clear shield sits over your eyes to take the flying debris, grit and wind, while a 5-layer activated carbon filter across your nose and mouth catches dust, pollen, sawdust and fumes before you breathe them in.

Two exhalation valves sit either side of the filter and push warm, damp air straight out and away - which is

the whole reason the lens stays clear instead of fogging over the moment you start working hard.

The shield lifts off in a second, so the same piece of kit goes from full-face cover when it is really dusty to a light mask when it is not. Filters pull out and swap in seconds, so one mask lasts you years.

• Step 1: Load: Slide a fresh filter into the inner pocket, carbon side facing in

• Step 2: Fit: Loop over the ears and pinch the nose bridge to seal it

• Step 3: Adjust: Tighten the rear strap until it sits snug without pressing

• Step 4: Clip on: Attach the eye shield - or leave it off when you only need the mask

Take the filter out before you wash the mask - the filter itself must never be washed!

Mask Material Breathable polyester mesh with neoprene facing

Filter 5-layer activated carbon pad, replaceable (approx. 3g)

Eye Shield Detachable clear anti-scratch lensValves Dual exhalation valves, replaceable (approx. 6g)

Weight Approx. 45g with shield attached

Fit Ear loops plus adjustable rear hook-and-loop strap

In the Box 1 mask, 1 eye shield, 5 filters, 2 spare valves

Filter Life 30 days typical use · 2-4 days in heavy dust or smog

Care Mask body hand-washable. Filter must not be washed.

Suitable For Any dusty job, indoors or out